If you are new to cnc this could be a great file to run
to learn how things move and work.

(The pic that is included shows a bad mark on the
left side of the skull. This is my fault as I had it
taped down and the tape moved so I had to hold it
with my hand the rest of the way thru the route.
If the pc is mounted well you will not have this bad 
mark.)

If you are new to cnc, understand the skull g-code 
file does not have an ext. 
Exp: Punisherskull-Gcode.exe

This is ok simply open it up in your controller 
software or add .txt to the end of the file w/e.

The gcode could use some optimization but runs 
fine. Feel free to edit the code to best suite your 
machines specs.

Set Y and X in the center.
You may have to adjust the Z and or edit the depth
etc.

I made this file for educational purposes only.

As with anything of this nature I am not 
responsible for any tool breakage or anything
that could occur from running this file.

Have fun.

If you have something you would like me to vector
-rize and turn in to g-code let me know I will try my 
best. Send e-mail to tech@xmarkcomputers.com
or cnczone.com user name dbtoutfit
