	
	Thank You for purchasing your DeskNC software from Hobby CNC!
Included are 2 machine setup files named:
Machine1.cfg	This does not use the limits or homing switches.
Machine2.cfg	This DOES use the limit and homing switches.
These are included to help you assign the proper values to the DeskNC machine setup.
Several items are assumed.....
1. Steppers are running at full step (200 steps per revolution)
2. You are using .2" pitch (5TPI) leadscrews
3. X axis home signal is connected to pin 15
4. Limit switches are Normally Open type wired in a parallel circuit
5. Home switches are Normally Closed type
	Please read the inclosed DeskNC20.txt file.  It has a complete explaination of the
commands and will answer many of your questions as to what gets set or what does what.
Of importance is the pinouts and bit identification diagrams included.  Try to get this setup
on your own.  The learning experience will be well worth it!  IF your just not getting ahead,
drop me an E-mail or phone call for help.
	Lastly, I must remind you to be careful and work slowly!
Thank You
Dave Rigotti
Hobby CNC

